User's Manual

Operating the Alarms

At the set time, the alarm will sound for up to one (1) hour.

1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the

Button. The alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed.

2. Press and release the Alarm Button during normal operation (alarm is not sounding) to preview the current alarm time,

arm the alarm (alarm icon is present) or to cancel it (no alarm icon).

3. Press and release the Snooze Button while alarm is sounding to temporarily silence the alarm for the set snooze time

(default is 9 minutes). To adjust the snooze time: press and hold the Snooze Button during normal operation (when alarm

is not sounding). The snooze time will flash on the display and 1 beep sounds. Press the – or + Button to adjust the

snooze time from 1 - 29 minutes. Press and release the Snooze Button again (or no button within 10 seconds). Two

beeps will sound to confirm snooze setting and return unit to normal operation.

Listening to FM Radio

Setting up the Antenna

Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.

Tuning and Playing the Radio

1. Press and release the Mode Button as needed to select FM radio mode.

2. When FM mode is selected, press the – or + Button to tune the radio to a desired station. The current radio frequency

appears in the lower part of the display. Press and hold the – or + Button for a few seconds to scan for the next clear

station.

3. To memorize a station as a preset:

A. Press the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and

then hold the Presets Button until the selected preset number begins flashing in the display and 1 beep sounds.

B. Press the – or + Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the

next clear station.

C. Press the Presets Button to confirm the setting, two confirmation beeps will confirm the setting and the preset

number you wish to assign. Repeat steps A-C to preset up to 6 stations.

4. To listen to a preset station, press the Presets Button to choose the desired preset.

5. Press the or Button on the unit to adjust the system volume.

Using the iBT290