User's Manual

Setting and Using the Alarms (Continued)

1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash. A beep

sounds.

2. Press the or Buttons to adjust the alarm time to the desired time (hold for rapid setting).

Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the

display.

3. Press the Alarm Button to confirm the alarm time setting. The wake-to source will flash.

4. Press the or Buttons to select the desired wake-to alarm source: Bluetooth, radio or tone.

Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is

detected, the alarm will default to buzzer.

Wake to Radio: Press the Alarm Button to confirm. Press the Presets Button to select an FM preset

to wake to, or press the or Buttons to tune in a desired wake to station.

Wake to Tone: You will wake to last selected tone

5. Press the Alarm Button to confirm wake-to source.

6. Press the or Buttons OR the or Buttons to adjust the alarm volume.

7. Press the Alarm Button to confirm alarm volume and enter wake-to light selection.

8. Press the or Buttons to select the desired wake-to light mode: Slow fade, Fast Change, One

Color (selects current color), Pulse to Music, Sky Gradient or Off (no change to light mode that is active

when alarm sounds).

9. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm

alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.

10. To turn off a sounding alarm and reset it to come on the next day at the same time, press the

Power/Alarm Reset Button or the associated alarm button (Alarm 1 Button or Alarm 2 Button) to reset

alarm.

Previewing the Alarm and Turning the Alarm On/Off

Press and release the desired Alarm Button as needed to preview the alarm and to toggle the alarm ON

(indicated by the alarm icon) or OFF (no alarm icon).

Using the iBT29