User's Manual

Setting and Using the Alarms

This unit has a dual alarm system so you can set two separate alarms to different alarm times and sources.

Setting the Alarms

Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( or ) for

whichever alarm you are setting.

1. Press and hold the or Button until the alarm icon flashes, the alarm time flashes on the lower part

of the display and a beep sounds. Press and release the – or + Button to set the alarm time (press and

hold for faster setting). Take care to set the correct AM or PM time.

2. Press and release the Alarm Button again to confirm the set alarm time. The current wake schedule will

flash. Press and release the – or + Button as needed to select “7 DAYS” (alarm sounds every day), “5

DAYS” (alarm sounds on week days) or “2 DAYS” (alarm sounds only on weekend).

3. Press and release the Alarm Button again to confirm the alarm schedule. The wake to icon will light and

the current alarm source will flash. Press the – or + Button as needed to select the alarm wake-to

source: Bluetooth, FM radio or Tone.

Wake to Bluetooth: when selected, you will wake to your most recent Bluetooth track

Wake to FM radio: The default wake to source is the current FM radio station. Press and release the

– or + Button to set a different station (press and hold to scan to the next clear station). To wake to

a preset station, press the Presets Button to cycle to the desired preset (see page 9 for details on

setting presets).

Wake to Tones: There are 4 tones to choose from. Press and release the – or + Button to audition and

select the desired alarm tone.

4. Press and release the Alarm Button again, then press and release the – or + Button to adjust the alarm

volume. Note that alarm volume is stored separately from standard volume.

5. Press and release the Alarm Button again, then press and release the – or + Button to set the color LED

wake cycle: Slow Fade, Fast, One Color, Pulse to Music, Random, Dawn, or None.

6. Press and release the Alarm Button again (or no button within 10 seconds) to exit the alarm setting

mode. 2 beeps will confirm alarm setting is complete. The alarm will be armed once set and the

corresponding alarm icon will light up. The lower part of the display will show the earliest set alarm time.

Using the

iBT280