User's Manual

3
Page 6
Using Bluetooth
Pairing
This unit features an auto-pair feature: when powered on for the first time (OR following a reset), the unit will automatically
attempt to pair with a new Bluetooth device. After this, Bluetooth devices must be paired using the Pairing/Mode Button.
1.
Power on your Bluetooth audio device and turn on Bluetooth capability on your device (check the instructions that came
with your device for details)
2. Press and release the Button located on top of the unit to turn the unit ON. The first time the unit is powered on,the
unit will automatically enter pairing mode. Otherwise, press and hold the Pairing/
Mode Button for 2 seconds to begin
pairing. Pairing mode is indicated by the Bluetooth icon and “PAIR” flashing on the display. “iHome iBT28” should appear
on your device’s list of Bluetooth devices. If “Not Paired”, “Not Connected” or similar message appears, or if prompted to
confirm that you wish to pair/connect, tap on “iHome iBT28” to confirm/ complete pairing.
3. If pairing is successful, 2 beeps will sound and “PAIRED” will appear on the display. If “FAILED” appears, attempt pairing
again by pressing and holding the Pairing/ Mode Button for 2 seconds. Once paired, your device will auto-link to the
unit whenever you are within range (30 feet).
Playing Bluetooth Audio
1.
Once paired with the unit, you can stream audio to it from our Bluetooth device. Press the FM presets Button located
on top of the unit to turn the unit ON and begin play. Audio wave icons will appear by the Bluetooth icon to indicate
Bluetooth audio mode. Press again to pause play, and again to resume play. Note: If unit is ON and in FM radio mode,
press and release the Pairing/
Mode Button as needed to cycle to Bluetooth mode before pressing the FM presets
Button.
2. Press the + or – Button to control track selection (press and gold to scan forward or backward within tracks).
3. Press the or Button on the unit to adjust the system volume.
Resetting Bluetooth Audio
To reset Bluetooth settings (clear all currently paired/linked devices), press and hold the Pairing/
Mode Button for 10
seconds. 2 beeps will confirm Bluetooth reset.
Display
Wake to indicator
PM indicator
AM indicator
Sleep mode indicator
Time display
Low Backup Battery indicator
Alarm display indicator
FM radio mode indicator display
Mode/Bedtime Sleep Timer/
FM station/alarm time display
Alarm 1 and 2 indicators
Alarm is armed and will sound at set time
Aux-in mode indicator
Bluetooth indicator:
• Flashes during pairing
• Solid when linked device is present
• Audio waves when Bluetooth audio is playing/paused