User's Manual

4. If pairing is successful, PAIR will appear at the bottom of the display, the Bluetooth icon will appear

solid and 2 beeps will sound, indicating the iBT210 is ready to play music. There should also be an

indication on your device. If no device is successfully paired within 3 minutes the iBT210 will default to

previous mode. Once the iBT210 is paired to a device, it will attempt to autolink when the device is

within range (about 33 feet).

When in Bluetooth mode, the iBT210 will attempt to autolink to a previously paired device. If no device is

paired, the iBT210 will automatically enter pairing mode for 3 minutes. You can manually initiate pairing

without turning on the iBT210 by following steps 1-3 below.

1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and

make it “discoverable” by turning on Bluetooth mode (check in Options or Settings) .

2. Press and hold the Play/Pause/Pairing Button for 2 seconds. The iBT210 will

beep and BT and the Bluetooth icon will flash on the display, indicating the

iBT210 is in pairing mode.

3. “iHome iBT210” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or

similar message appears, select “iHome iBT210” to connect it. If prompted for a passcode, enter “1234”

on your device’s keypad.

Using the iBT210

Pairing Your Bluetooth Device

pair

For iPhone

iHome iBT210 iHome iBT210

iHome iBT210

For other