User's Manual

Using the iBT12

Pairing Your Device

For iPhone

iHome Sound .. iHome SoundFlask12

iHome SoundFlask12

For other

Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT12. Once your device is

paired, the iBT12 can recognize it and you can play your audio through it.

1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and

make it “discoverable” by turning on Bluetooth mode (check in Options or Settings).

Press the Power Button

to turn on the iBT12.

3. Press and hold the Play/Pause/Pairing Button for 2 seconds. The iBT12 will

beep and the Bluetooth status indicator light will flash blue quickly.

4. “iHome SoundFlask12” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected”

or similar message appears, select “iHome SoundFlask12” to connect it. If prompted for a passcode,

enter “1234” on your device’s keypad.

5. If pairing is successful, 2 beeps will sound and the Bluetooth status indicator light will appear solid blue,

indicating the iBT12 is ready to play music. There should also be an indication on your device. If no

device is successfully paired within 3 minutes the iBT12 will default to previous mode. Once the iBT12

is paired to a device, it will attempt to autolink when the device is within range (about 30 feet).