User Manual

PAIRING A SINGLE SPEAKER TO BLUETOOTH

“iHome Split1” should appear on your device’s Bluetooth menu. Tap to select and complete

pairing. If pairing is successful a tone will sound and the status indicator LED will turn solid.

You can now play Bluetooth audio from the paired device. If no device is paired within 3 minutes,

the unit will revert to previous mode. Follow steps 1 - 4 above to try pairing again.

For iPhone

iHome Split1 iHome Split1

iHome Split1

For other

Each Split speaker can be paired independently provided the speakers are not physically

connected nor in range of one another (about 33 feet).

To pair a single speaker, follow steps 1-4 above. “iHome Split1” or iHomeSplit2” will appear on

the device’s Bluetooth menu, depending on which speaker is being paired:

Left (speaker A= iHome Split1), Right (speaker B= iHome Split2).

If you then physically connect two independently paired speakers, audio from Split 2 will be

replaced with audio from Split 1. The controls on the bottom of connected speakers are then

disabled. If only 1 speaker is paired, it becomes the master and its audio will play through both

speakers.