iBT11 IB_US version Size: 153 x 120 mm (16 pages) Color: 1C + 1C (Black) Material: 90gsm WF paper P1 May 07, 2015 Model iBT11 Split Rechargeable Bluetooth Stereo Speakers with Charging Base CHARGE BEFORE USE CAUTION: Split speakers have magnets on the bottom. To avoid damage, do not place on laptops, tablets or other electronic equipment.
Aux-in jack DC jack P2 Table of Contents What’s in the Box .............................................................................................................................................................................................................. 1 Product Care .....................................................................................................................................................................................................................
Controls Overview P3 Introduction Thank you for purchasing the Split Rechargeable Speakers with Charging Base. The Split is all about options. This unique unit features 2 separate speakers with individual controls which can be used connected together for great stereo sound via Bluetooth or aux in, or separated for even better stereo sound image via True Wireless. Each speaker can also be used as a separate mono speaker. Speakerphone capability allows you to listen to calls from either or both speakers.
P4 SPEAKER A SPEAKER B Back Panel Back Panel Micro USB Charging/Aux-in Port (under rubber cover) True Wireless LED True Wireless LED Battery indicator LED Battery indicator LED Front status LED Charging Dock (back panel 5V 1A DC Jack 3
P5 Charging Speakers CHARGING SPEAKERS USING CHARGING BASE 1 5V 1A CHARGE SPEAKERS BEFORE USE Connect the AC adaptor to the DC jack located on back of the Charging Base. Connect plug into a working wall outlet that is not controlled by a wall switch. Place Speaker A and Speaker B together as shown to connect them. (Gently pull apart to disconnect.) 2 3 4 Gently place connected speakers on Charging Base with charging contacts facing contacts on dock.
P6 CHARGING A SPEAKER USING MICRO USB CHARGING/AUDIO PORT Computer connected to working outlet Computer USB port OR USB AC adaptor (not included) NOTE: WHEN CHARGING VIA USB, ONLY THE SPEAKER CONNECTED TO THE USB CABLE WILL CHARGE To charge either speaker when away from the Charging Base, connect the included Combination USB Charging/Audio Cable to the Micro USB Charging/Audio Port (located under the rubber cover on each speaker) to one speaker and connect the other end to a USB power source such as a
P7 Using Bluetooth PAIRING BOTH SPEAKERS TO BLUETOOTH Pairing is the set-up process to introduce your Bluetooth-capable device to the Split. Once your device is paired, the Split can recognize it and you can play your audio through it. 1 2 Make sure your Bluetooth device and the Split are fully charged. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings). Make sure speakers are connected.
P8 4 For iPhone iHome Split1 iHome Split1 For other iHome Split1 iHome Split1 “iHome Split1” should appear on your device’s Bluetooth menu. Tap to select and complete pairing. If pairing is successful a tone will sound and the status indicator LED will turn solid. You can now play Bluetooth audio from the paired device. If no device is paired within 3 minutes, the unit will revert to previous mode. Follow steps 1 - 4 above to try pairing again.
P9 LISTENING TO BLUETOOTH AUDIO Press and hold the Power Button to turn on 1 both connected speakers. (For independent mono listening (speakers are separated), press and hold the Power Button on the desired speaker.) The power on tone will sound and the front status LED will flash slowly as the unit looks for a linked Bluetooth device. Once found, the LED will glow solid white. If operating on internal battery, the battery indicator LED will light for five seconds.
P10 4 Press and release the Power Button to turn the Split off. USING SPEAKERPHONE MODE ACCEPT CALL IGNORE CALL PLACE EXISTING CALL ON HOLD, ACCEPT NEW CALL END CALL The speaker must be ON and paired to a Bluetooth device for speakerphone mode. When a call is received, any playing audio is interrupted for the duration of the call.
P11 Using the Aux-in Mode 1 Mobile Phone PC/Tablet Game Devices iPod Laptop MP3/MP4 Connect one end of the included micro usb charging/aux audio cable to the Charging/Aux-in jack located on the back of the unit under the rubber cover and connect the 3.5mm audio plug to the headphone or line-out jack of your audio device. Turn on your device and put it in play mode. 2 3 Press and hold the Power Button to turn on the Split. The Status Indicator LED will glow, indicating the unit is powered on.
P12 Lithium Battery Warning Each speaker is powered by a rechargeable lithium battery. • Lithium batteries can explode or cause burns if disassembled, shorted, exposed to water, fire, or high temperatures & not handled appropriately • Store in cool, dry, ventilated area. Keep away from moisture. • Follow applicable laws and regulations for transport and disposal. Troubleshooting 1. The unit does not power ON.
P13 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
P18 iBT11 FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC ID: EMOIBT11 IC: 986B-IBT11 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P15 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 year (one year) from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
