User's Manual

P17

Unit doesn’t respond (no power)

• Check that all connections are correct and properly plugged in.

• For internal battery operation, make sure the unit is fully charged.

• Make sure your device is properly paired with the iBN6.

• Make sure the Power is ON.

Unit doesn’t respond

• If the unit appears to be “frozen” or locked up, you may need to reset it. To do so, press the Reset

Button located under the water resistant grommet on the side of the unit. The blue LED indicator on the

front of the unit will flash rapidly 5 times to indicate the unit has been reset.

Trouble pairing device with iBN6

Bluetooth implementation varies depending on your device’s hardware and operating system. Please see

our website for updates on pairing.

• If auto “Pair and play” on your NFC–enabled device fails, make sure Bluetooth is turned on and screen

is active (not dark) on NFC device. If pairing still fails, try to pair manually by pressing and holding the

Pairing Button on the top of the unit for 2 seconds.

• Make sure you have the latest firmware for your device.

• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing

and linking.

For further information and to see the latest instructions, visit www.ihome.com/support

Troubleshooting