User's Manual

P12

iBN6

Using the

Pairing with a Different Device

When you power ON the speaker, it will automatically link with the previously paired

Bluetooth device as long as that device is still within range (about 30 feet). To pair with a

different device, follow steps

1 – 3

on page 6.

Playing Audio Via Bluetooth

1. Press and hold the Power Button to turn on the unit. The light on front of the unit will flash

blue and ascending tones will sound and the unit will search for a previously paired device.

The light will turn solid blue once a previously paired device is detected. You can then listen to

audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.

Press the Button to play or pause audio.

3. Press the Button to go to the start of a track, press twice to play the previous track. Press the Button

to advance to the next track. Press and hold or for rapid search backwards or forwards within

a track.

4. Press the – Button or + Button to adjust the volume on the unit. Press and hold for rapid volume change.

The LED indicator on the front of the unit will flash 3X when the volume is at maximum OR minimum. You

can also adjust volume on your device.

5. When done listening, press the Power Button to turn the unit OFF. Remember to turn off your audio

device, too

Note: Do not play a Bluetooth device while an aux-in device is playing or you will hear both.