User's Manual

P11

iBN6

Using the

Using Bluetooth: Pairing Your Device Manually

1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user

manual.

2. Press and hold the Power Button located on top of the unit to turn the unit ON. The first time the unit

is turned on it will enter auto pairing mode: 2 tones will sound and the indicator light on the front of the

unit will flash blue while the unit attempts to pair.“iHome iBN6” should appear on your device’s menu. If

“Not Paired”, “Not Connected” or similar message appears, select “iHome iBN6” on device to

begin/complete pairing. If your device asks for a password, enter 1234 on the keyboard of your

device. If no device is paired within 2 minutes, the unit will revert to its previous state.

3. To pair a device in the future, turn on the unit then press and hold the

Button (located on top of the unit)

for 2 seconds. 2 tones will sound and the indicator light on front of the unit will flash blue while the unit

attempts to pair. “iHome iBN6” should appear on your device’s menu. If “Not Paired”, “Not Connected”

or similar message appears, select “iHome iBN6” on device to begin/complete pairing. If your device

asks for a password, enter 1234 on the keyboard of your device. To retry pairing, follow steps 1 – 3.

Once paired with a device, the blue indicator light will glow steadily and a confirmation tone will sound.

There should be an indication on your device that pairing is complete. On some devices, you must then

select “Use as Audio Device (stereo)” or similar on the device’s Bluetooth menu. Once paired, your device

should link to the powered on iBN6 whenever within range.