User's Manual

Playing Devices Using the Aux-in Jack

1. Connect a 3.5mm audio cable to the headphone jack or aux-out jack on your audio device and connect the other end to

the aux-in jack located on the bottom of the unit.

2. Press the

Power Button.

3. Use the controls on your device to pause and play audio and to navigate tracks and menus.

4. Press the or Button to adjust the volume level on the unit.

5. Press the

Power Button

to turn the unit off. Remember to turn off your aux device, too.

Resetting the unit

If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To do so, press point of a pin

or paperclip firmly into the Reset Port on the bottom of the unit to reset the unit

Using the Speakerphone

When a call is incoming:

• The LED indicator will flash green during an incoming phone call. Press the Power Button to answer a call.

• To ignore a phone call, press and hold the Power Button . The LED indicator will flash red twice to show that the

call was ignored.

When a call is in progress:

• When the LED indicator is lit green during an active phone call, press the Power Button to end call. When call is

ended, the LED will flash red twice and return to previous operation.

Receiving another call while call is already in progress:

• The power LED indicator will flash green while receiving another call. Briefly press the Power Button to answer the

call. Press and hold the Power Button to ignore an incoming call.

NOTE: After END or ignore call, unit will resume to previous operation.

Using the Unit