User's Manual

Playing Audio via Aux-In

1. Connect one end of the included standard stereo 3.5mm audio cable into the aux-in jack on the

back of the unit and the other end into the headphone or output jack of your audio device

2. Press the Power Button on the unit to turn it on.

3. Press and release the Mode Button as needed until “AUX-IN” appears on the display.

4. Turn on your audio device and put it in play mode.

5. Press the or Buttons to adjust the volume on the unit. You may need to adjust the volume on

your device, too.

6. When done listening, press the Power Button to turn the unit off. Remember to tun off your audio

device, too.

iBN43

Using the

P16

Charging Devices via USB Port

1. Connect the standard size end of a USB cable (not

included) to the USB Port on back of the unit and connect

the other end to the charging port on your device.

2. Monitor the charging on your device. Some devices use a

proprietary charging method and will not charge using the

USB Port. If this happens, you must charge your device

using the charger that came with it.

NOTE: unit must be plugged into working outlet to charge devices

DC 9V 3A