User's Manual

iBN4

Using the

Using Bluetooth:

Pairing and Playing Your Device Using NFC

This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play

instantly. For pairing non-NFC devices, please see the following section “Using Bluetooth: Pairing Your

Device Manually”.

1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability

(typically under ‘Settings’) as described in the device’s user manual.

2. Place your NFC–enabled device in play mode.

3. Turn the dial on the speaker unit to mode.

4. Touch the area of your playing NFC device against the area

on top of the unit. The unit will enter automatic pairing mode, tones

will sound and “PAIR” will flash on the display while the unit attempts

to pair. If prompted, accept Bluetooth pairing. “iHome iBN4” should

appear on your device’s menu under Bluetooth Settings.

Once paired

with a device, the PAIR indicator will stop flashing, the Bluetooth icon

will remain and your music will play through the unit.

Use the controls on your device to play or pause audio and navigate tracks.

6. Turn the Volume Dial to adjust the volume on the unit. You can also adjust volume on your device.

7. When done listening, turn the Power dial to turn the unit OFF. Remember to turn off your audio device,

too.

NOTE: To disconnect your device, simply touch it again on the area of the unit. To pair a device manually,

please see the following “Using Bluetooth: Pairing Your Device Manually” section.

06252013