User's Manual

LISTENING TO AUX DEVICES

1. Connect a standard audio cable with 3.5mm plug to the headphone or

line-out jack on your AUX device and the other end to the AUX IN jack

located on the back of the iBN350.

2. Press and release the Power Button to turn on the unit, then press and

release the Mode Button as needed to cycle through BT and AUX modes.

3. When AUX mode is selected, turn on your AUX device and use its controls

to play, pause and navigate audio tracks. Adjust the volume on your AUX

device to maximum output.

4. Press the or Button on the unit to adjust the system volume. Press

the Button to mute aux audio, and again to unmute.

5. Press and release the Power Button to turn o the unit when through

listening. Remember to turn o your AUX device, too.

MAINTENANCE

• Place the unit on a level surface away from sources of direct sunlight or

excessive heat.

• Protect your furniture when placing your unit on a natural wood and

lacquered ﬁnish. A cloth or other protective material should be placed

between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water.

Stronger cleaning agents such as thinner or similar materials can damage

the surface of the unit.