User's Manual

USING BLUETOOTH

Pairing Your Device Using NFC

Pairing is the set-up process to introduce your Bluetooth-capable device to the

iBN350. Once your device is paired, the iBN350 can recognize it and you can

play your audio through it.

This device features wireless NFC pairing, which allows playing NFC-enabled

devices to play and pair instantly. For non-NFC devices, please see the following

section “Pairing Your Device Using Standard Bluetooth.”

1. Turn on yourBluetooth-enabled/NFC-enabled device and turn on Bluetooth

and NFC capability as described in the device’s user manual.

2. Place your NFC-enabled device in play mode.

3. Touch the NFC area of your playing device against the NFC antenna area

located on the right side of the unit. The unit will turn on and enter

automatic pairing mode. The Bluetooth icon and “BT” will ﬂash on the

display, indicating pairing attempt.

4. “iHome iBN350” should on appear on your device’s Bluetooth menu.

Select “iHome iBN350” to complete pairing.

5. You are now ready to play audio from your device.

Pairing Your Device Using Standard Bluetooth

1. Press and hold the Bluetooth Pairing Button located on the front of the

unit for 3 seconds. The Bluetooth icon and “BT” will ﬂash on the display

and notes will sound indicating pairing mode.

2. “iHome iBN350” will appear on your device’s Bluetooth menu. Select “iHome

iBN350” to complete pairing.

If prompted for a passcode, enter “1234” on

your device’s keypad.

“Connected” or similar should appear on your device.

Tones will sound and the Bluetooth icon will appear solid indicating the

iBN350 is paired and ready to play music. If no device is successfully paired

within 3 minutes the unit will default to previous mode.

Once the unit is paired to a device, it will attempt to autolink when the

device is within range (about 33 feet)