User's Manual

Using the Speakerphone feature

NOTE: The unit does NOT have to be powered on to receive a call. A Bluetooth phone must be linked.

1. When a call is received, playing music is muted to hear the ring tone. Press the Talk Button to answer the

call, or press the End Button to ignore it. For call waiting function, press the Talk Button to place a

currently active call on hold and answer a new call; press the Talk Button to switch between the calls.

2. When a call is completed, press the End Button to end the call and resume previous function.

Playing Audio via Aux In

1. Connect one end of the included 12 inch stereo audio cable to the Aux-in jack on the back of the

unit and connect the other end to the headphone or line-out jack on your audio device.

2. Press the Power Button on the unit to turn it on.

3. Press and release the Mode Button as needed to cycle to Aux mode, indicated by AUX on the display.

4. Power on the audio device and use the controls on the device to play or pause audio, and navigate

tracks. Note: pressing the Presets Button while in Aux mode will MUTE/UNMUTE the unit.

5. Turn the Volume Knob to adjust the volume on the unit. You can also adjust volume on your device.

6. When done listening, press the Power Button to turn the unit OFF. Remember to turn off your audio

device, too.

iBN10

Using the

P15

mobile phone PSP iPod

Laptop

MP3/MP4