User's Manual

iBN10
Using the
7
P12
Using Bluetooth:
Pairing and Playing Your Device Using NFC
This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play
instantly. For pairing non-NFC devices, please see the following section “Pairing Your Device Manually”.
1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability as described in
the device’s user manual.
2. Place your NFC–enabled device in play mode.
3. Touch the area of your playing NFC device against the antenna area on top of the unit. The
unit will turn on and enter automatic pairing mode, a tone will sound and the light will flash blue while
the unit attempts to pair. “iHome iBN10” should appear on your device’s menu. If your device asks if
you wish to pair, accept (select “Yes” or similar).
Once paired with a device, the blue indicator light
will glow steadily, a confirmation tone will sound and your music will play through the unit.
4.
Press the Presets Button to play or pause audio.
5. Press the Button or Button to go to the start or end of a track, press twice for previous or next
track or press and hold to perform high speed search backwards or forwards within a track.
6. Turn the Volume Knob to adjust the volume on the unit. You can also adjust volume on your device.
7. When done listening, press the Power Button to turn the unit OFF. Remember to turn off your audio
device, too.
NOTE: To disconnect your device, simply touch it again on the antenna area on top of the unit. To
pair a device manually, please see the following “Pairing Your Device Manually” section.