P1 Model iA100 Bluetooth App Enhanced Alarm Clock Radio for iPad / iPhone / iPod ® Download the FREE iHome+Sleep app to use these features: • Social media alerts • Weather • Sleep stats • Interactive alarm settings Questions? Visit www.ihomeaudio.
P2 Table of Contents Quick Start..........................................................................................................................................................................1 Controls and Indicators / iA100 Display .............................................................................................................................3 Using the iA100 ............................................................................................................................
P3 FCC and IC Information This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
P4 iA100 Quick Start 1: Power 2: Pair Your Bluetooth-enabled Phone with the iA100 Connectivity Bluetooth Infrared Packet data Data transfer RESET R ESET TEST T EST Select 10:09 10:09 On Off Back Select Back Attach AC adaptor cable to DC jack on back of the iA100 and plug the other end into a wall socket a) Select Bluetooth/discover mode on your phone (see your user manual) b) Press the Pairing button located on the back of on the iA100.
P5 iA100 Quick Start 7: Inserts 8:iPad/iPhone/iPod Select the dock insert for your iPhone or iPod model from the table below and place insert in dock. iPad does not require an insert. Insert an iPad, iPhone or iPod into the dock with proper insert. The iPad, iPhone or iPod will charge while docked. Press the Play/Pause Button on the iA100 to play your iPad, iPhone or iPod.
P6 Controls and Indicators TOP VIEW Alarm Reset/Power/App Button Universal dock for iPad/iPhone/iPod Microphone Forward Button Play/Pause Button (for iPhone, iPod and Bluetooth music) Raise Volume Reverse / Set Button Lower Volume Bongiovi DPS Button End Button Mode Button Talk Button (iPod, Bluetooth, FM or aux-in) Bedtime Button REAR VIEW Clock Adjust Button EQ Button Snooze/Dimmer Button Pairing Button Nap Button Wakeup Button Alarm 1 Button Alarm 2 Button AC Adaptor Jack Aux- in Jack
P7 Using the iA100 Connecting the iA100 to Power Source Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC cord of the AC adaptor into the wall outlet. Turning the iA100 ON or OFF Press the Power/App Button on the iA100 at any time to turn the iA100 On or Off. Note that a docked iPad, iPhone or iPod will continue to charge when the unit is turned off as long as the AC adaptor is plugged in. Time Sync The iA100 clock is preset to U.S. Eastern Standard Time.
P8 Using the Alarms Setting the Alarms Alarm 1 a) Press and hold the Alarm 1 Button until the alarm time flashes at the bottom of the display. b) Press the or Button to set the desired alarm time. Hold to advance rapidly. c) Press Alarm 1 again then press the or Button to set alarm frequency (7 days,weekdays, weekend or custom). TIP: If custom is selected you must use the iHome+Sleep app to set custom alarm days.
P9 Listening to iPad, iPhone or iPod 1. Dock an already playing iPad, iPhone or iPod (always use proper insert, see table on page 2). The iA100 will automatically turn on and you will hear the audio playing from your iPad/iPhone/iPod. Note: If the audio source volume is too low on the iPad/iPhone/iPod, the iA100 may not detect that the iPad/iPhone/iPod is in play mode. If so, pressing the Button on the main unit once should make it play. 2.
P10 Listening to other portable audio devices You can play an MP3 player or other portable audio device through the iA100 via the Aux-in Jack. 1. Plug one end of an audio patch cord (available at http//:www.ihomeaudio.com) into the headphone or line-out jack on your device and the other end of the patch cord into the iA100 Aux-in Jack, located on the back of the unit. 2. Turn on the iA100 and press the Mode Button until “Aux-in” appears in the lower part of display, indicating Aux-in playing mode. 3.
P11 Making Calls with a Bluetooth Mobile Phone Before you make a call with the iA100, you need to pair and link your Bluetooth-enabled phone with the iA100. Please refer to Pairing procedure on page 7. Answer a Call: 1. To answer a call, press the Button. Now you can use the iA100 as a speaker phone. 2. Speak into the MIC (located above the Button) and press the or Button on the iA100 to adjust the call volume. 3. To end the call, press the Button. Dial/Re-dial Dialing: 1.
P12 Dimmer Operation During normal operation, press the Snooze Button to control the brightness of the LCD display. Install Clock Backup Batteries The iA100 uses 2 x AA backup batteries to provide backup alarm operation and clock settings in the event of a power failure. If the Backup Batteries have been installed and a power failure occurs or the AC cord is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained.
P13 A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P14 Trouble Shooting Symptom Unit doesn’t respond (no power) Possible Problem Solution AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of the unit. Plug the AC adaptor into a wall outlet and plug the connector into the AC jack on the unit Wall outlet is not functioning Plug another device into the same wall outlet to confirm the outlet is working. If the outlet is controlled by a switch, check that the switch is ON.
P15 Trouble Shooting Symptom Possible Problem Solution Device is not in play mode Make sure your device is powered and streaming music Device is not charged Make sure your device is adequately charged to last through the set alarm time Device does not support A2DP and AVRCP Bluetooth profiles If your device does not support the A2DP and AVRCP profiles, set your alarm to wake to radio Calls don't sound clear Volume on iA100 is too low Raise volume on the iA100 Poor connection or cell phone recep
P16 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
