User Manual

FRONT BACK
XX-B38 IB (English)
Size: 120 x 150 mm
Printing color: Black (1C + 1C)
Material: 85 gsm wood Free paper
Mar. 01, 2022
CHARGING THE HEADPHONES - MUST ALWAYS BE CONDUCTED BY AN ADULT
Model: B38 Series
Wireless Headphones
CHARGE BEFORE USE
POWER ON/OFF
- Press and hold the Multi-Function Button (MFB) for 2 seconds to turn headphones ON.
- Press and hold the Multi-Function Button (MFB) for 3 seconds to turn OFF.
VOLUME SWITCH
- Use the volume switch to select High, Medium, or Low. The unit is factory set to Low,
which is the recommended listening level.
BLUETOOTH PAIRING - MUST ALWAYS BE CONDUCTED BY AN ADULT
- When the headphones are ON, they will automatically enter pairing mode.
- Select ‘ek-B38VM’ on your Bluetooth-enabled device to connect.
- Headphones will automatically connect to your Bluetooth device whenever it is in range.
To manually pair, press and hold the MFB for 5 seconds to enter pairing mode. To reset
Bluetooth, press the MFB 3 times while in pairing mode.
CONTROLS
- Short press the MFB to play/pause audio.
- Use Next/Previous Track Buttons to navigate tracks.
- Short press the MFB to answer/end an incoming phone call.
- Press and hold the MFB for 2 seconds to reject an incoming phone call.
- Press and hold the MFB for 2 seconds to access Siri/Google Assistant.
Note: Headphones will automatically power OFF after 15 minutes of no activity.
AUX CABLE
- Use a 3.5mm aux cable (not included) for optional wired listening. (Please use adult
supervision when using an aux cable, greater than 300mm (12 in) for wired listening.)
LED INDICATORS
- LED flashes red/blue while in Bluetooth pairing mode, and flashes blue when connected.
- LED flashes red when battery is low, glows solid red while charging, and turns solid blue
when the headphones are fully charged.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B) / NMB-3(B)
ISED statements
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
L'appareil est conforme aux exigences d’exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes
sur l’exposition aux RF et la conformité.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité pourrait annuler le
droit de l’utilidateur à utiliser l'équipement.
B38_030122-A
Printed in China
USB-C
charging cable
(included)
To prevent possible hearing damage, do not listen at high volume levels for long periods.
THIS IS NOT A TOY.
USB-C AC
adaptor
(not included)
LED indicator
Charging Port
AUX jack
MFB
Volume Switch
WARNING: For your safety, do not use headphones if they would prevent you from hearing warning sounds, such
as while riding a bike, crossing the street, etc.
IMPORTANT SAFETY INSTRUCTIONS - Do not use or charge this product near a water source, and clean only with
dry cloth. Do not block any ventilation openings. Keep product away from heat sources. Only use accessories
specified by the manufacturer. Never leave unattended when charging.
GENERAL BATTERY PRECAUTIONS - Never use or charge a battery if it appears to be leaking, or in any way
abnormal. Avoid charging battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit). Never
expose a battery to any liquid, or to excessive heat such as direct sunlight or fire. Always keep batteries out of the
reach of infants and small children. Always charge lithium devices on a non-flammable surface - wooden tables/
carpeted floors are not recommended charging surfaces.
WARNING/DISPOSAL OF UNIT - Do NOT attempt to change or disassemble the built-in battery. Doing so will void
the warranty and could cause personal injury and damage to your device. Do not dispose of batteries in the
household trash or fire. Always dispose of used batteries/electronics in accordance with the prevailing community
regulations. To find a drop-off location near you, visit www.call2recycle.com
©2022 All Rights Reserved.
Next Track
Previous Track
ML H
FCC ID: EMOB38A
IC: 986B-B38A
HVIN: B38a