Instruction Manual

For questions or help with the installation, please email
[e-mail]
Store front hours: Mon. – Fri. 8:00am – 5:30pm and Sat. 9:00am – 2:00pm Arizona Time.
Page 4 of 6
***READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION! ***
Installation Instructions:
1. Unbox all of your parts, gather all required tools and familiarize yourself with the parts and
instructions.
2. Preparing your vehicle. Begin by opening your hood and locating the (2) bolts shown below.
Using a 10mm socket and ratchet, remove the front bolt and the rear bolt. Unclip the hood
latch wire from the fender frame to help with install.
3. Preparing your vehicle Continued. Remove the (2) 10mm nuts holding down the driver side
tie down. Remove the tie town and remove the 10mm fender bolt shown in green.