Instruction Manual

WRC SERIES
433MHz Wireless Transmitter/Receiver
P:\INST INSTRUCTIONS\Accessories\INST-WRC REV B 10-20 Page 1
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email engineer@sdcsecurity.com
SDC P/N: WRC-R2 or WRC-R2-12 SDC P/N: WRC-2B
WRC-R2 Series – Two-Channel Wireless Receiver Specifications:
Size with housing (approx.): 2.5” H x 1.75” W x 1.2” D
Frequency: 433.92MHz
Environmental: Indoor
Operating Temperature: -22°F – 140°F
Input Voltage (+/- 10%):
> Model WRC-R2 24VDC
> Model WRC-R2-1212VDC
Current consumption: 9mA (standby); 70mA (max)
Relay Outputs: Two (2) Dry, Form C (SPDT)
Contact rating: 10A@30VDC (resistive)
Wiring connections: 12”, 8-wire pigtail
Transmitter coding capacity: 30 (fixed code)
Transmitter programming using onboard learning button and status
LED
WRC-2B – Two-Button Transmitter Specifications:
Operates with WRC-R2 Series
Frequency: 433.92MHz
Voltage: 6VDC
Battery Replacement: – CR2016 Button Cell 3V
Lithium battery (x 2)
Transmitting distance: 50 m (no obstructions)
Housing: Keychain type
Activation: Hold “A” or “B” button for 1 sec.
Relay 1Relay 2
C B A C B A
+ (-)
M
L
Prog.
Status
LED
Wiring Pigtail
Connector
Learning
Button
Configuration
Jumpers
Mounting
tabs
SECURITY DOOR CONTROLS WWW.SDCSECURITY.COM
[t] 800.413.8783 ■ 805.494.0622 ■ E-mail: service@sdcsecurity.com ■ 801 Avenida Acaso, Camarillo, CA 93012 PO Box 3670, Camarillo, CA 93011
INSTALLATION INSTRUCTIONS

Summary of content (2 pages)