User's Manual

3. Before You Start Testing
•
Samples
The SD MultiCare™ analyzer for each parameter testing is designed for monitoring fresh
capillary whole blood samples, venous blood, or serum/plasma. Each sample is different
from test strip's type
Safety Information
There is a potential risk of infection. We recommend that healthcare professionals using
the SD MultiCare™ analyzer to perform measurements for more than one patient use
gloves and follow all other locally applicable health and safety regulations.
Operating conditions
To ensure proper function of your SD MultiCare™ analyzer, observe the following
guidelines:
Ÿ The SD MultiCare™ analyzer is only for interior use.
Ÿ The SD MultiCare™ analyzer is only for use within altitude 2,000M and humidity 85%
Ÿ Operate the analyzer only within the acceptable temperature range. This range is test-
dependent:
– For HbA1c 18-32 °C, Please refer to the test strip's package
Ÿ In order to perform a measurement, place the analyzer on a level surface or hold it in
your hand.
Ÿ Strong electromagnetic fields may impair the function of the analyzer. Do not use the
analyzer close to sources of strong electromagnetic radiation.
Ÿ The analyzer's air vents must be free for air (Do not cover the air vents)
Ÿ If the analyzer cause a sudden malfunction, unplug the AC adapter from the outlet.
Carefully read and follow the instructions in the User’s Manual and Package Inserts for
the test strips and control solutions. It is very important to follow the instructions in
order to prevent an incorrect result or improper treatment.