User's Manual

2. Strips may be stored in a refrigerator at 2~8 ℃ (35~46 ℉), but must be brought to
room temperature before using. Do not freeze.
3. Keep away from heat and direct sunlight.
4. Keep the code chip either in the analyzer or stored with other strips and do not store
the code chip in the HbA1c test strip package.
5. The glucose test strip container closes tightly and can protect the glucose test strips,
so you should keep the unused glucose test strips in the container in which they
came.
6. Use test strip as soon as you have removed it.
Lancet and Lancing device
1. The needle of lancet is sharp, keep the lancet away from children.
2. Keep the lancet and lancing device dry and do not store in direct sunlight, or high heat
and humidity locations.
3. A lancet should not use for the other intended use except sampling blood.
4. A lancet is for single use only. Do not reuse.
5. A lancet provided with the SD MultiCare™ Blood glucose analyzer is able to use every
lancing devices manufactured by other company. But if at all possible, use the lancing
device manufactured by Standard Diagnostics, Inc.
6. Before using, check a packaging condition, if there is any problem, you should not use
it.
7. If a lancet protective disk is loosed or needle of a lancet is exposed, you should not
use it.
8. To reduce the chance of infection for the used lancet, discard it.
Control solution
1. Do not use SD Control Solution that has passed the expiration date.
2. Keep the SD Glucose Control Solution in 46-86°F (8-30°C) environments.
3. Do not refrigerate or freeze.
4. The SD glucose Control Solution can be used for 3 months after opening the container.
Write the opened date on the SD Control Solution container when you first opened.
5. No reconstitution or dilution is necessary.
6. Wipe the container tip clean and reseal the container tightly after each use.