User's Manual

Stage 9) Setting – Calibration Type
*03MA10
In 9
th
stage, you set the Result calibration unit for HbA1c test.
1. Next will appear the display for setting the result unit - % or mg/dL or mmol/mol.
Set the each unit by pressing either ◀ or ▶ button and select by pressing the
Enter button
■Default Setting: NGSP(%)
Stage 10) Setting – eAG unit
*03MA10
In 10
th
stage, you set the Result unit for HbA1c test.
1. Next will appear the display for setting the result unit - % or mg/dL or mmol/L. Set
the each unit by pressing either ◀ or ▶ button and select by pressing the Enter
button
■Default Setting: mg/dL