User's Manual

5. Power supply
5V/2A DC power adapter or 4 AA alkaline batteries can be used.
When using batteries, to save power, the analyzer turns itself off after 2 minutes unless a
button is pressed or a new test strip is inserted. When the analyzer turns itself off, all test
results obtained so far remain in the memory. With a set of fresh batteries, you will
normally be able to perform at least 200 measurements. When the battery warning is
displayed for the first time, approximately 50 measurements can still be performed.
In this case, replace the batteries as soon as possible.
Please respect the environment and dispose of used batteries according to your local
regulations and laws.
Do not throw batteries onto an open fire. There is a risk of explosion!
• Time
• eAG value
(mg/dL or mmol/L)