User's Manual

4. How to use the SD Glucose check strip
1) Insert the SD Glucose Check Strip with the
check strip print facing up into the glucose test
strip slot. Then the analyzer starts the glucose check strip testing automatically.
NOTE: There is no special mode to enter for this glucose check strip testing. If the SD
Glucose Check Strip is inserted into the analyzer, the analyzer starts the check strip test
automatically.
2) The check strip test result will appear on the screen after 5 seconds. If there is no problem
with the analyzer, the OK message with the GLU icon will appear on the screen. If there is a
problem with the analyzer, the EEE error message will appear on the screen.
- 45 -