User's Manual
Table Of Contents
- CHAPTER 1. Understanding THE New Analyzer
- CHAPTER 2. Using the SD LipidoCare Professional Analyzer
- CHAPTER 3. Collecting blood samples
- CHAPTER 4. Performing a test for lipid or glucose
- CHAPTER 5. Control Solution Test
- CHAPTER 6. CHECK strip Test
- CHAPTER 7. Maintenance and Troubleshooting
- CHAPTER 8. Screen Message and Troubleshooting
- CHAPTER 9. Warnings, Precautions, and Limitations
- CHAPTER 10. Technical Information
- Appendix 1: References
- Appendix 2: Warning
CAUTION
• Do not open the door during the test.
• If you do not close the door after applying the blood sample to the test strip, the Close
Door message will appear on the screen, accompanied by warning beeps.
• If you do not close the door within 20 seconds after the blood sample is applied, the
analyzer will display the E-7 error message.
• The entire blood application area must be filled with blood drop.
- 35 -