User's Manual

CHAPTER 4. PERFORMING A TEST FOR LIPID OR GLUCOSE
1. Before testing for lipid or glucose
1) Before Testing
Make sure you have all the necessary components.
SD LipidoCare Professional system
• SD LipidoCare Professional Analyzer
• SD LipidoCare Professional Lipid Profile Test Strip
• SD LipidoCare Professional Blood Glucose Test Strip
• Sample collection tool, such as a reusable lancing device, lancets, and a capillary
tube (optional)
If you want to purchase sample collection tools, please contact the SD Biosensor
customer service center at 1-855-486-2888.
<Precaution>
Do
• Read the test strip package insert.
• Operate the analyzer at the acceptable test-conditions:
- For lipid testing : 64–90°F (18–32°C), 10–90% RH
- For glucose testing: 50–113°F (10–45°C), 10–90% RH
• Place the analyzer on a level surface or hold it steady in your hand.
• Keep the guidelines for cleaning and disinfecting.
• Make sure that all display elements are displayed.
Do not
• Use lipid test strips beyond the expiration date, as this may cause inaccurate results.
• Touch or remove the test strip during actual measurement.
• Subject the analyzer to sudden movements during a measurement.
• Reuse the test strip.
• Store the test strips at extreme temperatures or humidity.
• Open the door during the measurement.
CAUTION: Not following these precautions can lead to inaccurate results.
- 32 -