User's Manual

4) If there are not any stored glucose test results, the following display will appear on the
screen:
NOTE:
You cannot search the stored results or averages if a glucose test strip is inserted in the
analyzer.
7. Deleting test data
1) Switch the analyzer on and then press the left or right button in order to enter the Memory
mode at the test strip (lipid or glucose) standby state.
2) Navigate through to identify the result you want to delete. Press the left and right button
together, and hold for 3 seconds.
3) The dEL message will appear on the screen. Press the SET/PRT button, and hold it for 3
seconds.
- 27 -