User's Manual

Glucose Mode
If you want to review only the glucose results, you can review them in the glucose mode. After
entering the Memory mode of the memory, press the SET/PRT button 2 times, quickly, to
change the glucose mode. On the screen, both
and the icon will appear in the
glucose mode.
At first, the latest stored glucose result among all of the stored glucose results will appear on
the screen.
After displaying the latest glucose result on the screen, press the left button to review the
second latest stored glucose result.
When displaying the latest stored glucose result on the screen, you can press the right button
to review the oldest stored glucose result in the analyzer.
6. Displaying the average of glucose test results
The analyzer can calculate 7-, 15-, and 30-day averages of glucose test results stored in
memory. The HI/Lo result (results outside of the reading range) and control solution test
results are not included in the averages.
Searching Glucose Averages
1) Switch the analyzer on, then press the left or right button to enter the All memory mode.
2) Press the SET/PRT button to enter the Glucose mode.
3) Press the right button to review the three kinds of averages, which are 7-, 15-, and 30-day
averages of the glucose test results stored in memory, in sequence. You can also check
the number of glucose results used for calculating the average in the right bottom of the
LCD window. If you press the left button once more after displaying the 30-day average,
the 7-day average result appears again.
- 26 -