User's Manual

Lipid Mode
If you want to review the lipid results only, you can review them in the Lipid mode. After
entering the Memory mode, the All mode will appear. Press the SET/PRT button quickly to
enter the Lipid mode.
When you perform a lipid profile test using the SD LipidoCare Professional Lipid Profile Test
strip, you will get six parameter results in total, at once. The index number is assigned to all
the parameter results from a test. You can review them all by pressing the left or right button.
The following picture describes the parameter, in sequence. On the screen, both the
and
icons appear in the Lipid mode.
How to review the data
When 500 results are stored in the memory, the first displayed result is the TC value of the
500th result.
If you press the left button at the TC value, the TC value of the index 499 will appear. Use the
left button at the TC value to go to the previous index test results.
If you press the right button, TG, HDL, LDL, LDL/HDL, and non-HDL will appear, in order. After
TC, you can use the left button to view the results of the previous parameter.
Ex)
- 25 -