User's Manual

4. Analyzer Memory
The SD LipidoCare Professional Analyzer can store the test results of up to 500 data with
testing dates and times, and it can assign a number to let you review the test results in order,
from the most recent to the oldest. If the memory is full and a new result is added, the
analyzer deletes the oldest result.
• ALL mode
• Lipid mode : 6 sub-parameters:
1) TC, 2) TG, 3) HDL, 4) LDL, 5) LDL/HDL, 6) non-HDL
• Glucose mode
The SD LipidoCare Professional Analyzer has a function that shows the averages for only the
glucose parameter.
LCD Symbol of Memory
Symbol
Details
Indicates that it displays the test results stored in the memory, only for the
mode you selected (just one mode at a time)
Indicates that it displays the test results stored in the memory of all the
parameters.
NOTE:
The data will display with the corresponding parameter symbol, such as Lipid or Glucose .
When you enter the ALL mode, the initial A will appear at the center of the memory symbol.
Mode change
You can change the mode by pressing the SET/PRT button at the memory mode. The order of
the memory mode is as follows:
• Press the SET/PRT button quickly to change the memory mode.
• Each time you press the SET/PRT button, the latest result of the mode will be displayed.
• Press the left button to view the next result in the specific memory mode.
• If you press the right button, the oldest stored result will appear on the screen.
• You can exit memory mode by pressing the ON/OFF button in any memory mode.
- 23 -