User's Manual
Table Of Contents
- CHAPTER 1. Understanding THE New Analyzer
- CHAPTER 2. Using the SD LipidoCare Professional Analyzer
- CHAPTER 3. Collecting blood samples
- CHAPTER 4. Performing a test for lipid or glucose
- CHAPTER 5. Control Solution Test
- CHAPTER 6. CHECK strip Test
- CHAPTER 7. Maintenance and Troubleshooting
- CHAPTER 8. Screen Message and Troubleshooting
- CHAPTER 9. Warnings, Precautions, and Limitations
- CHAPTER 10. Technical Information
- Appendix 1: References
- Appendix 2: Warning
4)
After the search is complete, the available analyzer will be listed on the screen. Select the
available analyzer by clicking the address of the analyzer.
5)
When complete, the Pairing Is Done message will appear on the screen.
At the same time, the analyzer will display the OK message on the screen. If you receive
both messages on the PC and the analyzer, pairing was done successfully.
6)
After the pairing processes are complete, the analyzer is now ready for testing.
NOTE: You can download the LMD program from our website: www.sdbiosensor.com
.
This program is free of charge.
- 22 -