User's Manual
Table Of Contents
- CHAPTER 1. Understanding THE New Analyzer
- CHAPTER 2. Using the SD LipidoCare Professional Analyzer
- CHAPTER 3. Collecting blood samples
- CHAPTER 4. Performing a test for lipid or glucose
- CHAPTER 5. Control Solution Test
- CHAPTER 6. CHECK strip Test
- CHAPTER 7. Maintenance and Troubleshooting
- CHAPTER 8. Screen Message and Troubleshooting
- CHAPTER 9. Warnings, Precautions, and Limitations
- CHAPTER 10. Technical Information
- Appendix 1: References
- Appendix 2: Warning
3. Pairing, only for 02LA20G
If you want the analyzer to be paired with a PC, the pairing step is necessary, and the lipid
management software (LMS) should be installed on the PC. To start the pairing process, follow
the steps below:
1)
At the strip standby state for either a lipid or glucose, press the ON/OFF button and hold it
for 2 seconds. Then, the bt icon will appear on the left side of the screen with the setting
icon, which means pairing is ready.
2)
Open the Lipid Management Software (LMS), installed on the PC. Click the Setting menu on
the left side, and then check the bluetooth equipment at the check box.
3)
Click the Pairing button on the screen to look for the device for pairing. It will start to search
the SD LipidoCare Professional Analyzer nearby.
- 21 -