User's Manual
Table Of Contents
- CHAPTER 1. Understanding THE New Analyzer
- CHAPTER 2. Using the SD LipidoCare Professional Analyzer
- CHAPTER 3. Collecting blood samples
- CHAPTER 4. Performing a test for lipid or glucose
- CHAPTER 5. Control Solution Test
- CHAPTER 6. CHECK strip Test
- CHAPTER 7. Maintenance and Troubleshooting
- CHAPTER 8. Screen Message and Troubleshooting
- CHAPTER 9. Warnings, Precautions, and Limitations
- CHAPTER 10. Technical Information
- Appendix 1: References
- Appendix 2: Warning
Indicate
s the testing time
Low Density Lipoprotein
Total Cholesterol
Triglycerides
High Density Lipoprotein
Glucose
LDL
to HDL ratio
non-HDL
5. Power supply
To save power, the analyzer turns itself off after 5 minutes, unless a button is pressed or a new
test strip is inserted. When the analyzer turns itself off, all test results are stored in the memory.
Battery life is expected to last for approximately 1,000 measurements. When the battery
warning is displayed for the first time, approximately 50 measurements can still be performed.
In this case, replace the batteries as soon as possible. When replacing the new batteries, you
must reset the date and time. Use only AAA alkaline manganese batteries. The stored test
results, including the testing date and time as well as all other analyzer settings, will remain,
even when no batteries are inserted. Do not throw batteries into a fire. There is a risk of
explosion!
6. Test strips
SD LipidoCare Professional Lipid Profile Test
Strip
SD LipidoCare Professional Blood
GlucoseTest Strip
Lipid Check Strip
Glucose Check Strip
- 10 -