User Manual Part 2

36
Testing Your Blood Sugar
36
SD GlucoNavii® Link0.3 NFC BLOOD GLUCOSE MONITORING SYSTEM
2. Performing a Blood Glucose Test
1) Remove a new test strip from container. Be sure to tightly
replace container cap after removing test strip.
2) Make sure the meter turn o. And then, insert the test strip
into the meter.
3) When the blood drop symbol ashes (Blood Stand-by
Display), you are ready to perform a test.
4) Let your arm hang down at your side to allow blood to
ow to your ngertips. Grasp your nger just below the
joint closest to the ngertip.
5) Obtain a drop of blood sample using the lancet and
lancing device.
6) Hold your nger to the tip of the strip until the yellow
window is completely lled with blood. Do not place the
blood drop on top of the strip.
Always wash hands with warm, soapy water. Rinse
and dry them before testing.
NOTE
Link0.3
nuGsWUZGumj|GluYWXZW[X^YUGGGZ] YWXZTW[TX^GGG㝘䟸G\aXZaW`