User Manual Part 1

16
Understanding Your New System
SD GlucoNavii® Link0.3 NFC BLOOD GLUCOSE MONITORING SYSTEM
10. Meter Set up
STEP-1 : Setting the Audible Beep
1. In Strip Stand-by Display, if you press the ON/OFF
button during 3 seconds, the display for setting the
beep will appear, the rst step of the setting mode.
2. Set the beep mode on or o by pressing either
the left or the right button and then selecting the
preferred feature by pressing the ON/OFF button. If
you select the beep on feature, a ‘beep’ sound is made
at the same time; otherwise, if you select the beep o
feature, no sound is made.
[ During 3 sec. ]
Link0.3
[ Left or right
button ]
Link0.3
Link0.3
[ ON/OFF
button ]
nuGsWUZGumj|GluYWXZW[X^YUGGGX] YWXZTW[TX^GGG㝘䟸G\aXYa[^