User Manual Part 1

Understanding Your New System

SD GlucoNavii® Link0.3 NFC BLOOD GLUCOSE MONITORING SYSTEM

STEP-2: Insert the 3V battery (type CR2032) into the

compartment with “+” side facing you.

STEP-3: Snap battery cover back in place.

STEP-4: Push the ON/OFF button or insert a strip to start

testing.

After inserting or replacing the battery, conrm

that the time and date are set correctly. If they

are not, use the ON/OFF and left/right buttons to

reset the meter before testing. See the “10. Meter

Set up”.

NOTE

nuGsWUZGumj|GluYWXZW[X^YUGGGX\ YWXZTW[TX^GGG㝘䟸G\aXYa[[