User Manual
36
Testing Your Blood Sugar
36
SD GlucoNavii
®
Mentor NFC BLOOD GLUCOSE MONITORING SYSTEM
2. Performing a Blood Glucose Test
1) Remove a new test strip from container. Be sure to tightly
replace container cap after removing test strip.
2) Make sure the meter turn o. And then, insert the test strip
into the meter.
3) When the blood drop symbol ashes (Blood Stand-by
Display), you are ready to perform a test.
4) Let your arm hang down at your side to allow blood to
ow to your ngertips. Grasp your nger just below the
joint closest to the ngertip.
5) Obtain a drop of blood sample using the lancet and
lancing device.
6) Hold your nger to the tip of the strip until the yellow
window is completely lled with blood. Do not place the
blood drop on top of the strip.
Always wash hands with warm, soapy water. Rinse
and dry them before testing.
NOTE
Mentor
NFC
nuGtGumj|GYWXZW[X]ZUGGGZ] YWXZTW[TX]GGG㝘䟸G\a\_a\]