Specifications

©Copyright 2001-2013 SD Group (Panasonic, SanDisk, Toshiba) and SD Card Association
Physical Layer Simplified Specification Version 4.10
178
6.4.1
Power Up Sequence for SD Bus Interface
Yes
6.4.2
Power Up Sequence for UHS-II Interface
Yes
6.5
Programmable Card Output Driver (3.3V Single End)
Yes
6.6
Bus Operating Conditions for 3.3V Signaling
Yes
6.6.1
Threshold Level for High Voltage Range
Yes
Yes
6.6.2
Peak Voltage and Leakage Current
Yes
6.6.3
Current Consumption
Yes
Yes
6.6.4
Bus signal line load
Yes
6.6.5
Bus Signal Levels
Yes
6.6.6
Bus Timing (Default)
Yes
6.6.7
Bus Timing (High-Speed Mode)
Yes
6.7
Driver Strength and Bus Timing for 1.8V Signaling
Yes
6.8
Electrical Static Discharge (ESD) Requirement
Yes
Yes
7.
SPI Mode
Yes
8.
Sections Effective to SD I/F Mode and UHS-II Mode
Yes
Yes
A.1
Related Documentation
Yes
Yes
B.1
Terminology
Yes
Yes
B.2
Abbreviations
Yes
Yes
D.1
UHS-I Tuning Procedure
Yes
C.1
Internal Clock Delay Method
Yes
E.1
Decoupling Capacitor Connected to Power Line
Yes
Yes
E.2
Decoupling Capacitors
Yes
Yes
Table 8-1 : Sections Effective to SD I/F Mode and UHS-II Mode