Product manual

Page 2 - Precision Blue
Adding/Replacing Bluetooth Phone (2 Phones maximum)
1- Set the BlueTooth enabled phone name to ScyTek.
2- Turn on the ignition key On, Off, and back On. 10 times.
3- The LED will illuminate.
4- Set the BlueTooth enabled phone to discoverable mode.
5- Turn Ignition Off.
6- The LED will start Flashing.
7- Once the Phone has been detected the LED will turn Off.
8- Change the BlueTooth enabled phone name to original name other than
ScyTek.
Programming Table
Adding a second Bluetooth cellphone
connect a second Precision Blue module to the first ( master) unit with a 3 pin Cnet
connector.
Set the second Precision Blue module to slave mode by Removing the master/slave jumper inside the module.
1- Set the BlueTooth enabled phone name to ScyTek.
2- Turn on the ignition key On, Off, and back On. 10 times.
3- The LED will illuminate.
4- Press and release the valet switch one time.
5- Set the BlueTooth enabled phone to discoverable mode.
6- Turn Ignition off.
7- The LED will start Flashing.
8- Once the Phone has been detected the LED will turn Off.
9- Change the BlueTooth enabled phone name to original name other than
ScyTek.
Branch Feature Ignition OFF/ON Ignition OFF/ON Ignition OFF/ON
1 Time (default) 2 Times 3 Times
1. Exit Delay (Seconds) 10 15 20
2. Ignition Controlled Lock On Off
3. Ignition Controlled Unlock On Off
4. Door Lock Pulse Length 1 Second 3 Seconds 0.1 Second
5. Door Unlock Pulse Single Double
6. Horn/Sidelight Option Horn Sidelight
7. Extended Parking Lights On Off
8. Horn Pulse Duration Normal Extended