Product manual

ScyTek Electronics
11627 Cantara Street
North Hollywood, CA 91605
www.scytek.net
© ScyTek Electronics 2014 G5.2W, G2.2W, A4.2W, A1.2W 10-01-14
Wiring Diagram
Green Lock output (-) 500mA
Blue Unlock output (-) 500mA
Green/White Brake Input(+)
Black/Gray Tachometer Input
White/Red Auxiliary 2 Output (-)500mA
Black/White Dome Light output (-)500mA (must use relay)
Yellow Emergency brake (-)
Blue/Yellow Glow plug (wait to start) Input (+)
Blue/White Passenger Unlock Output (-)500mA
Blue/Orange Remote Start Output (-)500mA
Black Ground
Red +12V Battery Input #3
Violet Door Trigger Input (+)
Green Door Trigger Input (-)
White/Black Hood/Trunk Input (-)
Orange Armed Output (-)500mA
Violet/White Factory Alarm Disarm Output (-)500mA
White/Violet Auxiliary 3/Factory Alarm Arm Output (-)500mA
Brown Siren Output (+)3A
Gray Auxiliary 1 Output (-)500mA
White Parking Light Output (+/- built-in relay)
Brown/White Horn Output (-)500mA
Violet Starter Output
Yellow Ignition 1 Output/ Input
Orange Accessory Output
Brown Ignition 2 Output
Red +12V Battery Input #1
Red +12V Battery Input #2
G5.2W, A4.2W
G2.2W, A1.2W
Series
For Manual Transmission:
Must Install System Made For Manual Transmission:
G5-M and G2-M
For Manual Transmision These wires Must be connected : Tachometer input , Emergency Brake and Door Trigger
Main Harness
Starter Harness
Shock Sensor
Door Lock
LED
Antenna
Valet SW
Data Port