Product manual

Page 8 - G5.2W, G2.2W, A4.2W, A1.2W
AUTO display starter autostart enabled features.
1. Press and hold Button 5 until the display shows AUTO.
·The transmitter will beep three times.
2. Release Button 5.
· The LCD panel will display what starter auto start features are enabled.
SPCL Program the pager time of a day clock from the internal Remote Starter clock, the remoter starter
sends its time to the pager.
1. Press and hold Button 5 until the display shows SPCL.
·The transmitter will beep four times.
2. Release Button 5.
· The pager will display the new time.
SSCL Program the remote starter time of a day clock from the pagerS
1. Press and hold Button 5 until the display shows SPCL.
·The transmitter will beep five times.
2. Release Button 5.
· The pager will display confirmation that the starter clock is sync.
C St Auto Start Cold Temperature Activation Mode.
1. Press and hold Button 5 until the display shows C St.
· The transmitter will beep 6 times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show Auto Start Cold Temperature setting.
3. Press and hold Button 5 until the display shows CON.
4. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show "ON" indicating that Auto Start Cold Temperature Activation
Mode is enabled.
H St Auto Start Hot Temperature Activation Mode.
1. Press and hold Button 5 until the display shows H St.
· The transmitter will beep 7 times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show Auto Start Hot Temperature setting.
3. Press and hold Button 5 until the display shows CON.
4. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show "ON" indicating that Auto Start Hot Temperature Activation
Mode is enabled
A St Auto Start Daily Activation Mode.
1. Press and hold Button 5 until the display shows A St.
· The transmitter will beep 8 times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show Daily Auto Start time setting.
3. Press and hold Button 5 until the display shows CON.
4. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show "ON" indicating that Daily Auto Start Activation
Mode is enabled
SND sound function selects the transmitter's confirmation mode - Tone or Vibration mode.
Set the transmitter confirmation tones ON or OFF:
1. Press and hold Button 5 until the display shows SND.
· The transmitter will beep 9 times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD transmitter will beep 5 times and display “on” if the sounds are enabled or vibrate and
display "off" for the Remote to vibrate.