User Manual

Introduction of SCULPFUN S6/S6 Pro Engraving Machine
The SCULPFUN S6/S6 Pro laser engraving machine uses a fixed-focus laser. The way to focus the
laser on the engraved object is: place the fixed-focus column on the surface of the engraved object, slide
the laser module until the edge touches the fixed-focus column, and fix the module screw by hand , Take
off the fixed-focus column to complete the fixed-focus.
The laser protective cover can help us block most of the glare. You don’t have to wear glasses all the
time, and people around you can also do not wear goggles. But you can wear goggles if you feel it is
necessary.
The laser power of the SCULPFUN S6/S6 Pro laser engraving machine is about 5.5W. It can easily cut
some wood panels, acrylic, and engrave blackened metal. However, it is not recommended to cut
reflective materials and transparent materials.
The engraving machine of SCULPFUN S6/S6 Pro supports PWM control (pulse width modulation). PWM
will make the engraved patterns more layered.
Right-angle measuring ruler: X-axis and Y-axis contain precise scale lines, which is convenient for you to
measure the size of engraving objects quickly. The 410x420mm large-area engraving interval can meet
your various engraving needs.
Extensive compatibility: The machine can be compatible with various mature engraving software, such
as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports
Windows system, and also supports MAC system (LightBurn), engraving file format supports JPG , PNG,
DXF, SVG, G-code, NC, BMP, etc.
Safety design: The machine is equipped with a power switch to facilitate emergency power off. Fixing
holes are reserved on the four feet and the body structure to facilitate fixing the machine and the data
cable.
Section 1. Download LaserGRBL software
1. LaserGRBL is one of the most popular DIY laser engraving software in the world, we can
download it from LaserGRBL website: http://lasergrbl.com/download/. Double-click the software
installation package to start the software installation, keep clicking Next until the installation is
complete
Instructions for using engraving machine
3