User Manual

User Manual Catalog
Security Statement
Before starting laser engraving, please read this safety guide carefully. It mentions situations that require
special attention, including warnings about unsafe behaviors. Please observe and pay attention to this
statement to protect your safety.
1. Laser safety
This machine uses Class 4 laser products. The power of the laser is so high that it may cause eye injuries
and burn the skin.
We installed a laser shield on the laser, which can filter out the diffuse reflected light at the laser focal
point. We gave away goggles, you can bring goggles if you need them.
2. Fire safety
Since the material is burned or evaporated during cutting, the high-intensity laser beam generates
extremely high temperatures and generates a lot of heat. Please try to keep indoor ventilation or add
exhaust equipment.
Certain materials can catch fire during cutting, especially flammable materials such as wood and paper.
During the engraving process, please try to put a metal pad or other fireproof pad on the bottom of the
engraving machine to protect the safety of the table or workbench.
Always keep a working fire extinguisher nearby.
3. Material safety
Do not engrave materials with unknown properties.
Recommended engraving materials: wood, acrylic, bamboo, leather, fabric, paper, black-coated cermet.
Materials that are not recommended: glossy metal, transparent materials, reflective materials, plastic, etc.
At the end of the manual we attached which materials are not suitable for engraving.
4. Safe to use
The engraving machine can only be used horizontally, and ensure that the engraving machine is reliably
fixed. Fixing holes are reserved on the four tripods, and other devices can be used to fix them on the
workbench. Prevent accidental displacement or falling of the work surface during work to cause fire;
It is strictly forbidden to point the laser towards people, animals or any combustible materials, regardless
of whether it is in working condition or not.
Teenagers must have parental supervision during use.
Security statement························································································ 2
Introduction of SCULPFUN S6/S6 Pro ····························································· 3
Section 1. Download LaserGRBL software······················································ 3
Section 2. Connecting the laser engraving machine········································ 4
Section 3. Engraving preparation and preview················································ 4-7
Section 4. Start of engraving and control of engraving······································ 7
Section 5.Common materials and parameter recommendations······· ················· 8
Section 6.Common problems and solutions························································· 9
Section 7.LightBurn installation guide··································································· 9
Section 8 Important notes ·································································· 10
2