User Manual

Customer Service:
Ø For detailed warranty policy,please visit
our official website at:
www.sculpfun3d.com
Ø For Laser Engraver technical support and
service,please email:
[e-mail]
Manufacturer: Shenzhen Sculpfun
Technology Co., Ltd.
Address: Building D, Longguang Jiuzuan Business
Center South, Daling Community, Minzhi Street, Longhua
District, Shenzhen, Guangdong, China 518131
Scanner APP:
QR Code Reader
/Barcode Scanner
or any APP with scanner
Sculp your fun !
10
Section 8 Important notes for machine maintenance and use
1、If it is used on an extremely smooth desktop, it is best to fix the four
feet with a cable tie, or put a rubber anti-skid pad under the four feet.
This can effectively prevent the machine from sliding during engraving.
2、The belts and pulleys need to be checked for tightness regularly. If
they are loose: the belt can be reinstalled and tightened; the pulley can be
adjusted by the eccentric nut.
3、If the laser feels that the energy is not strong enough, first check
whether the laser lens is contaminated by dust. You only need to clean
the lens to increase the laser power again. The laser lens and eye
protection cover should be cleaned regularly. You can refer to the
following link
https://www.youtube.com/watch?v=29N5Runr52Y