User guide

7
UWATEC
®
SmartTRAK
English
Printing a dive profile
Select Dive Profile.
Printing a logbook
Select Logbook. Only the columns which are visible in the Dive table window will be printed.
If not all columns fit on the paper, the rightmost ones are left out. The printed column widths
can be adjusted by adjusting column widths on the Dive table window.
Printing the statistics for dives
Select Statistics. Select the kind of statistics you would like to print by checking the
appropriate statistics types.
Previewing a dive profile/logbook/statistics
Press the Preview button to preview the print out in a preview window.
Profile scale
1 means that the dive profile will span the whole sheet.
0.9 means that the dive will span 90 % of the sheet.
Grey scale dive profile
If you have a black and white printer, with this option you can enhance dive profile graphics
printing quality.
Font size
The font size for the logbook and statistics print out can be selected with this option. Default
value is 10. Decreasing the number will decrease the font size. Smaller font size will enable
more logbook columns to fit on the page.
Font color
The font color for the logbook and statistics print out can be selected with this option.
Select…
Press Select… to select what dives and pertinent information to be printed out.
2.2 Dives
2.2.1 Transfer Dives
Use Dives/Transfer to transfer
the dives from your dive computer.
You can transfer all dives or new
dives only. When all dives are
transferred, each transferred dive
is checked against dives in the
logbook and if it exists already,
the transferred dive is discarded.
See section 5.1 on how to set-up
and configure an IrDA device if
you do not have an IrDA
device installed.