User guide

20
UWATEC
®
SmartTRAK
4.8 Physiology Panel
This graph shows estimated micro bubble
formation (left), estimated skin temperature
cooling (middle) and estimated workload
(right). For gas integrated computers this
panel also shows the gas consumption gauge
if the tank has been defined and there is a
non-zero tank pressure difference between
beginning and end of dive.
4.9 Alarm Symbols
The following alarm symbols appear at the bottom of the dive profile display:
Excessive ascent rate
The icon indicates that an ascent rate of 110% has been reached or
exceeded.
Oxygen toxicity
The icon indicates that the oxygen toxicity of 75% / 100% has been
reached.
Missed deco stop
The icon indicates that the diver has ignored decompression stop.
Oxygen partial pressure
The icon indicates that the set value of ppO
2 (default is 1.4 bar) has
been reached or exceeded.
Missed level stop
The icon indicates that the diver has ignored a level stop and that
the MB-level has decreased.
Maximum depth
The icon indicates that the preset maximum depth has been reached.
Maximum dive time
The icon indicates that the preset maximum dive time has been
reached.
RBT alarm
The icon indicates that the remaining bottom time (RBT) is less than
three minutes (yellow) or 0 minutes (red).
Increased gas consumption warning
The icon indicates increased gas consumption.
S
L
O
W
L
CNS
ppO
2
Gas integrated computers only: