User guide

18
UWATEC
®
SmartTRAK
Delete marker
A marker can be deleted by pressing the right mouse button over the text and selecting
Marker and then Delete from the pop-up menu.
4.3 Adding Remarks to the Dive
You can write and edit remarks for every dive if the remarks panel is active. The remarks panel
can be activated from the layout window or from the dive window pop-up menu. The remarks
panel font size can be adjusted from the layout window only.
Remarks can be edited on the Edit page too.
4.4 Adding Pictures to the Dive
You can add and view pictures for every dive if the picture panel is active. The picture panel
can be activated from the layout window or from the dive window pop-up menu. The picture
panel has its own pop-up menu, which enables to load/insert a new picture into the picture
panel, delete pictures from the panel and view them in full size in a separate window. Dive
picture panel and fish picture panel alternate; they cannot be shown at the same time.
Note that only a link to the picture file is saved in the logbook, therefore after inserting a
picture to the logbook, do not rename it or move it to a different directory or delete it.
Otherwise SmartTRAK cannot find it and display it any more. If you move the dive picture
folder to another location, you can correct the links by inserting one picture from the new
location to the collection and SmartTRAK will correct automatically all broken links for the dive
pictures which it can find from that folder.
4.5 Dive Profile Panel
The dive profile panel shows some information about the dive at the top and the dive profile
below it.
The information shown at the top is the following:
• left: interval and immersion time
• middle left: maximum depth and dive time
• middle right: average depth and CNS after the dive
• right: desaturation time and time at end of dive
The average gas consumption and maximum gas consumption (gas integrated computers only)
is shown to the right of average depth and CNS. For Smart TEC the average gas consumption
includes all tanks and the maximum gas consumption is indicated for the tank which had the
highest instantaneous consumption. Gas consumption information can be displayed only if the
tanks are defined under section 4.10.6.
The dive profile shows the depth as a function of time. It also shows the water temperature or
workload (gas integrated computers only). Water temperature is not shown for dives imported
from DataTrak.
The Maximum Operating Depth (MOD, function of the set ppO
2max) is shown with a thick
black line, if the depth scale allows to show it. Normally the line is constant for the whole dive.
For Smart TEC the MOD is individual for each tank and the line can have a step after each tank
switch.